- Inhabitat – Sustainable Design Innovation, Eco Architecture, Green Building - http://inhabitat.com -

3D Printed Sand Pods Create Cooling Microclimates

Posted By Bridgette Meinhold On November 30, 2010 @ 7:30 pm In Architecture,Sustainable Building | No Comments

microclimates, rapid prototyping, postlerferguson, evaporative cooling, desert architecture [6]

Traditional desert architecture often utilizes passive design elements such as wind towers and earthen walls [7] to minimize solar heat gain. PostlerFerguson’s microclimate pods offer another approach that could serve as art installations while working to help cool public areas. The sand pods would be placed in plazas, squares, or along streets, and the evaporative cooling action [8] from the pods would lower the temperature of their immediate surroundings.

microclimates, rapid prototyping, postlerferguson, evaporative cooling, desert architecture [9]

Each pod is created using a 3D printing technique [10] that builds up layers of locally-sourced sand combined with a magnesium-based binder. The forms of the pods are based upon a 3D interpretation of the masharabiya, resulting in a complex internal structure with a very large surface area. Water would be drawn up inside the pods and then it would evaporate, cooling air as it passes through the structure.

The conceptual cooling system was designed for the Dubai-based gallery and studio Traffic [11]. It explores historic and traditional Islamic architecture as well as advanced production techniques. New methods of production, which draw on the aesthetic and sustainable benefits of traditional buildings, help realize a modern vision of what 21st century architecture in Dubai could achieve.

+ PostlerFerguson [12]

Via Dezeen [13]


Article printed from Inhabitat – Sustainable Design Innovation, Eco Architecture, Green Building: http://inhabitat.com

URL to article: http://inhabitat.com/3d-printed-sand-pods-create-cooling-microclimates/

URLs in this post:

[1]

: http://inhabitat.com/3d-printed-sand-pods-create-cooling-microclimates/microclimate-coolers-1/?extend=1

[2]  : http://inhabitat.com/3d-printed-sand-pods-create-cooling-microclimates/microclimate-coolers-11/?extend=1

[3] desert architecture: http://inhabitat.com/desert-architecture-by-binary-design-studio/

[4] PostlerFerguson: http://www.postlerferguson.com/

[5] cooling through evaporation: http://en.wikipedia.org/wiki/Evaporative_cooler

[6] Image: http://inhabitat.com/3d-printed-sand-pods-create-cooling-microclimates/microclimate-coolers-4/

[7] earthen walls: http://inhabitat.com/exceptional-earth-walled-home-is-a-desert-oasis/

[8] evaporative cooling action: http://inhabitat.com/ceramic-ecooler-screen-is-a-beautiful-passive-cooling-system/

[9] Image: http://inhabitat.com/3d-printed-sand-pods-create-cooling-microclimates/microclimate-coolers-11/

[10] 3D printing technique: http://inhabitat.com/3-d-printing-set-on-changing-sustainable-textile-production/

[11] Traffic: http://viatraffic.org/

[12] + PostlerFerguson: http://www.postlerferguson.com/work/microclimates

[13] Dezeen: http://www.dezeen.com/2010/11/29/microclimates-by-postlerferguson/

Copyright © 2011 Inhabitat Local - New York. All rights reserved.