- Inhabitat – Sustainable Design Innovation, Eco Architecture, Green Building - http://inhabitat.com -

Precast Concrete Bases Improve Wind Turbine Efficiency

Posted By Timon Singh On August 31, 2010 @ 12:34 pm In Renewable Energy,Wind Power | 3 Comments

wind turbine concrete, turbine concrete base, offshore turbines grout mix, turbines concrete base, concrete carbon footprint, atlas ctb white paper, concrete reduction, wind turbine tower eight, wind turbine concrete [1]Photo © Flickr DraconianRain [2]

A recently-released report announced that the use of precast concrete bases can actually make wind turbines [3] sturdier, more efficient, and less resource-intensive to produce. According to the Atlas CTB White Paper [4], the wider footprint of precast concrete bases adds stability to the foundation of wind turbines and can reduce the amount of concrete needed to install them by 60-70%. The precast bases also make it easier to raise taller turbines into more powerful winds, and their rapid construction time means that more turbines can be built.

wind turbine concrete, turbine concrete base, offshore turbines grout mix, turbines concrete base, concrete carbon footprint, atlas ctb white paper, concrete reduction, wind turbine tower eight, wind turbine concrete [5]Photo © Flickr Lance Cheung [6]

Concrete [7] and wind turbines have a strange relationship — the material requires tremendous amounts of energy to produce and accounts for 5% of global CO2 emissions, but it is essential for the installation of large wind turbines. Several months ago a report stated that hundreds of offshore turbines could potentially collapse into the sea [8] due to poor grout mixture being used in the bedrock and poured concrete base. Then it was reported that the base, made of cement, sand and gravel, was not holding the turbines firmly enough, causing some turbines to shift several centimeters since installation.

Precast concrete bases eliminate these issues — the turbine’s load is spread over a wider area, and a simpler ring footing can be utilized. A ring footing is also easier to construct, since the problems associated with a mass pour can be avoided. Not only that, the towers’ height can be easily raised with concrete bases, allowing turbine heights to be tailored to increase power production. Taller turbines can use larger diameter blades and have better access to more powerful winds. Precast concrete tower bases can potentially add 30 meters (almost 100 feet) to the height of a wind turbine tower.

Concrete is largely impervious to to damage and rust and is one of sturdiest building materials in the world — but it is responsible for a large amount of emissions in the construction industry. What do you think – does harnessing this durable material to produce green energy justify its use?

Via Ecogeek [9]


Article printed from Inhabitat – Sustainable Design Innovation, Eco Architecture, Green Building: http://inhabitat.com

URL to article: http://inhabitat.com/precast-concrete-bases-improve-wind-turbine-efficiency/

URLs in this post:

[1] Image: http://inhabitat.com/2010/08/31/precast-concrete-bases-improve-wind-turbine-efficiency/windturbinebase1/

[2] Flickr DraconianRain: http://www.flickr.com/photos/draconianrain/2168620431/

[3] wind turbines: http://www.inhabitat.com/2010/02/16/norway-to-build-the-worlds-largest-wind-turbine/

[4] Atlas CTB White Paper: http://www.atlasctb.com/tindall_assets/WhitePaper.pdf

[5] Image: http://inhabitat.com/2010/08/31/precast-concrete-bases-improve-wind-turbine-efficiency/090628-f-2907c-538/

[6] Flickr Lance Cheung: http://www.flickr.com/photos/lancecheungmedia/3718985998/

[7] Concrete: http://www.inhabitat.com/2009/02/05/is-it-green-concrete/

[8] hundreds of offshore turbines could potentially collapse into the sea: http://www.euinfrastructure.com/news/eu-wind-turbines-collapsing/

[9] Ecogeek: http://ecogeek.org/component/content/article/3277

Copyright © 2011 Inhabitat Local - New York. All rights reserved.