- Inhabitat – Green Design, Innovation, Architecture, Green Building - http://inhabitat.com -

Smithsonian Institute Uses 3D Printing to Replicate and Share Its Collection with the World

Posted By Lori Zimmer On February 29, 2012 @ 12:15 pm In Green Technology,Innovation,News | No Comments

green design, eco design, sustainable design, Smithsonian Insitute, 3d printing, National Museum of African American History and Culture, Thomas Jefferson Statue, Thomas Jefferson statue replica, 3d scanned museum digital archive, RedEye on Demand, Studio EIS [1]

The Smithsonian Institute [2]’s vast collection numbers over 137 million items, and of that only 2 percent is on display at one time. Despite many pieces being in storage, the Institute is making a concerted effort to share its bounty with the rest of the country by making copies available. Traditionally, sculptures and busts are copied using an arduous process of molding and casting. But the Smithsonian [3] decided that using modern technology could be a better way to create museum quality replicas.

Using a Minolta laser scanner worth upwards of $100,000, sculptures, busts, and other items are scanned to create meticulous 3D model [4]s. The Smithsonian works with Studio EIS [5] to create the scan, and then has the file printed by RedEye on Demand [6]. Just like castings, the models are then treated with the appropriate patinas, paints and finishes to match the originals.

By replicating the pieces digitally, the Smithsonian is not only making copies easily available, but also slowly creating a 3D digital archive [7]. The scans together make up an alternate digital Smithsonian which could keep artifact information safe should the originals be damaged, but also enables museums, schools, and other organizations unprecedented access to the museum’s collection.

+ Smithsonian Institute [8]

Via CNET [9]

Images ©Smithsonian 3D Digitization [10]

Article printed from Inhabitat – Green Design, Innovation, Architecture, Green Building: http://inhabitat.com

URL to article: http://inhabitat.com/smithsonian-institute-uses-3d-printing-to-replicate-part-of-its-collection/

URLs in this post:

[1] Image: http://inhabitat.com/smithsonian-institute-uses-3d-printing-to-replicate-part-of-its-collection/smithsonian7/

[2] The Smithsonian Institute: http://inhabitat.com/the-smithsonians-vaulted-canopy-brings-nature-and-light-inside/

[3] Smithsonian: http://inhabitat.com/david-adjayes-african-american-smithsonian-museum-breaks-ground-this-week/

[4] meticulous 3D model: http://inhabitat.com/83-year-old-woman-gets-the-worlds-first-3d-printed-jaw/

[5] Studio EIS: http://www.studioeis.com/

[6] RedEye on Demand: http://www.redeyeondemand.com/

[7] 3D digital archive: http://inhabitat.com/3d-printed-little-shining-man-kite-by-heather-and-ivan-morison-is-a-stunning-kinetic-sculpture/

[8] + Smithsonian Institute: http://www.si.edu

[9] CNET: http://news.cnet.com/8301-13772_3-57384166-52/smithsonian-turns-to-3d-to-bring-collection-to-the-world/

[10] Smithsonian 3D Digitization: https://www.facebook.com/3d.si.edu

Copyright © 2011 Inhabitat Local - New York. All rights reserved.