3d printer

Beautiful Star Lounge is one of the world’s biggest 3D-printed PLA structures

Beautiful Star Lounge is one of the world’s biggest 3D-printed PLA structures

http://vimeo.com/129315252 Emerging Objects and Bold Machines fabricated the 121-square-foot Star Lounge using a ‘BotFarm’ that comprised over 100 3D printers. Each printer could 3D print two

Read More >

This next-gen 3D printer spits out fully assembled products

This next-gen 3D printer spits out fully assembled products

The not-especially-modestly titled Industrial Revolution III (IR3) is a nextgen 3D printer that will not only print out your designs, but will assemble them with your non-printable components to create

Read More >

Scientists Create World’s First 3D-Printed 3D Printer!

Scientists Create World’s First 3D-Printed 3D Printer!

Researchers at Germany's Doppelbock University just opened the door to the future of rapid prototyping technology by developing the world's first 3D-printed 3D printer! Dubbed the Ecophage, the

Read More >

UC Berkeley unveils  3D-printed “Bloom” building made of powdered cement

UC Berkeley unveils 3D-printed “Bloom” building made of powdered cement

Ronald Rael and UC Berkeley's College of Environmental Design just unveiled the world's largest 3D printed building made from powdered cement! Measuring 9 feet high by 12 feet wide and 12 feet deep, the

Read More >

Need a home? Now you can 3D print one—out of mud

Need a home? Now you can 3D print one—out of mud

Inspired by the mud dauber, a little wasp which builds its home with mud, Massimo Moretti later learned of bio-architecture and started to work to put the two together. Concerned about the housing crisis

Read More >

Voxel8 unveils world’s first 3D electronics printer

Voxel8 unveils world’s first 3D electronics printer

The Harvard-based Voxel8 team has created a 3D printer that makes fully functioning electromechnical assemblies. The printer uses special software that allows users to design objects with working

Read More >

Edag’s Light Cocoon is a 3D-printed car inspired by leaves

Edag’s Light Cocoon is a 3D-printed car inspired by leaves

Last spring, EDAG unveiled a 3D-printed car that was inspired by a turtle - and the German engineering firm just unveiled its latest car inspired by nature. The EDAG Light Cocoon has a skeletal, organic

Read More >

Made in Space: NASA Creates First-Ever 3D-Printed Object in Space

Made in Space: NASA Creates First-Ever 3D-Printed Object in Space

NASA astronauts aboard the International Space Station have created the first-ever object to be 3D printed in space. The 3D printer, which was developed by Made in Space, was delivered to the ISS by a

Read More >

Skanska and Foster + Partners are Creating the World’s First 3D Printing Robot

Skanska and Foster + Partners are Creating the World’s First 3D Printing Robot

Swedish concrete manufacturer Skansa and architecture firm Foster + Partners have teamed up to create the first 3D-printing concrete robot. The team is using the technology to print high-performance

Read More >

The World’s Smallest, Cheapest 3D Printer Can be Yours for $299

The World’s Smallest, Cheapest 3D Printer Can be Yours for $299

Getting a start in 3D printing can be a pretty costly and intimidating endeavor, with most printers in the affordable range coming in at around $1,000. But for $299, the makers of the iBox Nano aim to

Read More >

Local Motors 3D-Prints Incredible Full-Scale Car in Just 44 Hours!

Local Motors 3D-Prints Incredible Full-Scale Car in Just 44 Hours!

Arizona-based Local Motors has succeeded in creating the world's first 3D-printed car at the International Manufacturing Technology Show (IMTS) in Chicago. Called the Strati, the 3D-printed car's design

Read More >

Man Builds World’s First 3D-Printed Concrete Castle in His Own Backyard

Man Builds World’s First 3D-Printed Concrete Castle in His Own Backyard

Rudenko's grand 3D-printed castle and his self-built 3D printer was a labor of love. Drawing from the knowledge of the RepRap community, the Minnesotan contractor footed the bill for the project

Read More >

Could Bees 3D-Print Concrete Structures in the Cities of the Future?

Could Bees 3D-Print Concrete Structures in the Cities of the Future?

Bees already pollinate the great majority of our fruits and veggies - but could they build our buildings as well? Former Gizmodo Editor-in-Chief Geoff Manaugh, and designer John Becker came up a plan to

Read More >

Next Generation Membrane Pacemakers Wrap the Heart Like an Electronic Glove

Next Generation Membrane Pacemakers Wrap the Heart Like an Electronic Glove

This heart is wrapped in a special electronic membrane that keeps it beating at the perfect rate. Researchers from the University of Illinois at Urbana-Champaign and Washington University in St. Louis

Read More >

A 15-Year-Old is Developing a 3D Printer That’s 10 Times Faster Than Anything on the Market!

A 15-Year-Old is Developing a 3D Printer That’s 10 Times Faster Than Anything on the Market!

When it comes to global innovation, teenagers are leading the way. The latest teen genius to cross our radar is Thomas Suarez, a 15-year-old who claims to have designed a 3D printer that is ten times

Read More >

Fabric Pen is a Tiny 3D Printer that Mends Clothing On-the-Go

Fabric Pen is a Tiny 3D Printer that Mends Clothing On-the-Go

Lots of people carry around sewing kits and stain-removal pens for those on-the-go clothing emergencies, but how about a 3D printer that could actually mend rips or damage right on the spot? The Fabric

Read More >

This Titan 1 3D Printer Can Make Towering Objects in Half the Time

This Titan 1 3D Printer Can Make Towering Objects in Half the Time

The 3D printing revolution has begun, and there's no shortage of hardware available - from a printer that costs just $150 to a portable printer you can carry with you on the go. But if you're looking to

Read More >

New Matter’s Elegant Mod-t 3D Printer Costs as Little as $149

New Matter’s Elegant Mod-t 3D Printer Costs as Little as $149

Even with MakerBot's mass appeal, 3D printers are still too expensive and complex for most people to have at home. Now a new start up called New Matter is introducing a truly affordable printer that costs

Read More >

New 3D Printer Allows You to Print Your Own Makeup at Home

New 3D Printer Allows You to Print Your Own Makeup at Home

Makeup creates a massive amount of waste, from the packaging to the containers, but what if you could print your own at home with no packaging and no limitations? That’s the idea behind inventor Grace

Read More >

Scientists Harness the Power of 3D Printers in the Battle to Cure Cancer

Scientists Harness the Power of 3D Printers in the Battle to Cure Cancer

The fight to cure cancer exists in a three-dimensional world, but up until now scientists have had to make do with testing therapies in the flatlands of a petri dish. Now a team from Drexel University led

Read More >

Engineer Makes World’s First 3D-Printed Kayak for Just $500 with a Homemade 3D Printer

Engineer Makes World’s First 3D-Printed Kayak for Just $500 with a Homemade 3D Printer

An engineer for leading 3D printer manufacturer 3D Systems, Jim Smith decided to build his own large scale 3D printer at home and then used it to produce the world's first 3D-printed kayak. To print the

Read More >

Solar-Powered 3D Printer Turns Desert Sand Into Glass Bowls and Sculptures

Solar-Powered 3D Printer Turns Desert Sand Into Glass Bowls and Sculptures

The Solar Sinter is made up of seven stations: a photovoltaic panel, the focal point for drawing the sun’s rays, a sun tracker, fresnel lens (for magnifying the rays), a battery, controlling

Read More >

The OpenKnit Printer by Gerard Rubio ‘Prints’ Sweaters In Under An Hour!

The OpenKnit Printer by Gerard Rubio ‘Prints’ Sweaters In Under An Hour!

Has "learn to knit" been on your to-do list for years? Are you envious of the scarves, sweaters, and cowls knitted by your DIY-minded friends? A new invention from Gerard Rubio could make homemade clothes

Read More >

MX3D-Metal 3D Printer Creates Complex Metal Objects in Thin Air

MX3D-Metal 3D Printer Creates Complex Metal Objects in Thin Air

Amsterdam-based Joris Laarman Lab teamed up with the Institute for Advanced Architecture of Catalonia (IAAC) to design a 3D printer that can produce complex metal objects in thin air. MX3D-Metal is a

Read More >

Incredible ChefPro 3D Printer Creates Sweet Custom Candies!

Incredible ChefPro 3D Printer Creates Sweet Custom Candies!

Culinary artists will soon be able to join the 3D printing revolution thanks to an amazing new candy printer. The ChefPro from 3D Systems unveiled at the Consumer Electronics Show in Las Vegas this week

Read More >

Brilliant 3D Grass Printer Can Print a Garden in Any Shape You Can Imagine

Brilliant 3D Grass Printer Can Print a Garden in Any Shape You Can Imagine

Gardening just entered the 21st century - a team of students at the University of Maribor in Slovenia developed an innovative 3D printer that can create objects out of living grass! Maja Petek, Tina

Read More >

Luminous Saltygloo Pavilion 3D-Printed From Sea Salt!

Luminous Saltygloo Pavilion 3D-Printed From Sea Salt!

Created by Emerging Objects founders, Ronald Rael and Virginia San Fratello, the Saltygloo is an artistic experiment in using 3D printing technology and additive manufacturing techniques to turn local

Read More >

Scientists Could Develop 3D-Printed Hearts Within 10 Years

Scientists Could Develop 3D-Printed Hearts Within 10 Years

There is a revolution underway, but it has nothing to do with politics. Stuart Williams, a researcher from the Cardiovascular Innovation Institute, believes that advances in 3D-printing could culminate in

Read More >

3D-Printed Human Cells Will Replace Animal Testing in Five Years, Says Bioengineer Expert

3D-Printed Human Cells Will Replace Animal Testing in Five Years, Says Bioengineer Expert

Photo via Yurchyks/Shutterstock 3D-printing could soon bring about an end to animal abuse in drug testing, according to bioengineering expert Alan Faulkner-Jones. Speaking at the 3D Printshow Hospital

Read More >

Open-Source ‘Precious Plastic’ Machines Recycle Small Scale Waste

Open-Source ‘Precious Plastic’ Machines Recycle Small Scale Waste

When Design Academy Eindhoven graduate student Dave Hakkens learned that only ten percent of discarded plastic is actually recycled, he decided to create "Precious Plastic," an open-source collection of

Read More >

  • Read Inhabitat

  • Search Categories

  • Recent Posts

  • Recent Comments

  • Browse by Keyword

get the free Inhabitat newsletter

Submit this form
popular today
all time
most commented
more popular stories >
more popular stories >
more popular stories >
Federated Media Publishing - Home