Watershed Materials, a California based building materials technology startup, has developed a solution to produce high strength masonry with a low carbon footprint using natural mineral based geopolymers. The technology allows for natural clays found readily all over the planet to be turned into reliable masonry products and offers a sustainable alternative to traditional concrete masonry. Recent test samples have achieved compressive strengths twice the strength of ordinary concrete, and have demonstrated remarkable resistance to water and chemical erosion. Concrete masonry is one of the world’s most common construction materials, but unfortunately, it has a high carbon footprint due to its reliance on Portland cement, a material responsible for 6 percent of the world’s CO2 emissions.

geopolymer, Watershed Materials, clay bricks, clay building material, eco friendly building material, sustainable building, reader submission, sustainable construction, portland cement alternative, cement alternative, sustainable clay bricks

“The implications for this technology are enormous,” says David Easton, Watershed Materials’ president and co-founder. “Using geopolymer technology to produce dependable building materials from natural clay minerals found throughout the developed and developing world is a local solution with global impact.”

Watershed Materials’ technology, funded by the National Science Foundation, utilizes the geopolymerization of natural clay minerals and provides a more ecological, natural and globally available technology for producing building materials. Natural clays can be sourced from quarry and mine waste as well as construction site excavation. Masonry building products made with Watershed Materials’ technology inherit the visual appeal of their local production and appear more complex than typical grey concrete that is made from virgin mined rock washed of local color variations.

Related: Rammed Earth Desert Courtyard House Built From the Ground Upon Which it Sits in Arizona

Geopolymers are a new technology that provide an alternative to Portland cement used in concrete and masonry. Until now, geopolymers have mostly relied on fly ash, a byproduct of burning coal, or blast furnace slag, a byproduct of iron and steel production. These industrial waste products are available only adjacent to coal fired power plants and steel production facilities, and the world does not produce enough to meet demand for concrete products. In place of these materials, Watershed Materials’ technology activates globally abundant natural clay-based minerals to form strong geopolymer reactions.

Clays have been used for thousands of years as a construction material, but traditionally require energy intensive, high-temperature kilning to overcome the tendency for clay to weather easily in rain and snow. Watershed Materials’ geopolymer technology changes the chemical structure of clays and allows their use in long lasting, high compressive strength, weather resistant masonry. “These minerals were overlooked by others because they are not immediately reactive as a geopolymer” says Dr. Jose Muñoz, Watershed Materials’ director of technology. “We’ve solved the puzzle to allow natural clays to form geopolymer bonds for the production of high strength building materials.”

Dr. Muñoz and Taj Easton, Watershed Materials’ research lab manager, spent four years refining the process. Masonry produced with this technology will use less energy to produce, uses no cement, no fly ash, no blast furnace slag, requires no high temperature kilning, incorporates no dyes or colorants, and will open up previously overlooked, widely available natural and recycled materials as ideal for the production of durable building materials.

+ Watershed Materials

The article above was submitted to us by an Inhabitat reader. Want to see your story on Inhabitat? Send us a tip by following this link. Remember to follow our instructions carefully to boost your chances of being chosen for publishing!