In a bid to curb plastic waste pollution, India-based company Rhino Machines has invented a way of using plastic to make construction blocks. The silica plastic blocks (SPBs) are strong enough to build a house and can be useful in reducing world pollution problems. As the company behind this new technology, Rhino Machines experimented to determine the viability of making construction bricks from waste plastic and foundry dust. According to the company, they conducted experiments in collaboration with R+D Labs to prove that SPBs can be used to replace traditional construction blocks.
Why recycle plastic waste?
This experiment came from the need to find a permanent solution to India’s growing plastic waste problem. According to 2012 estimations by the Central Pollution Control Board of India (CPCB), India generates close to 26,000 tons of plastic a day. Additionally, as The Economic Times reports, over 10,000 tons of plastic waste go uncollected each day. This plastic waste litters streets, landfills and the seas. Furthermore, as non-biodegradable waste, the plastic ends up polluting rivers, agricultural land and even estates.
The plastic waste pollution problem is not limited to India. According to a 2017 National Geographic publication, over 91% of the plastic waste produced globally is not recycled. The same publication points out that as of 2018, the world has generated over 8.3 billion metric tons of plastic since plastic began being mass-produced. About 6.3 billion metric tons of this waste ends up as waste in landfills, oceans and rivers. National Geographic also points out that if the global community doesn’t contain the current trend of plastic waste pollution, landfills will house 12 billion metric tons of plastic waste by 2050.
All the problems caused by plastic waste are now pushing scientists and innovators to look for solutions that will create a sustainable world. Although some countries have banned single-use plastics, the current amount of plastic waste still takes an enormous toll on the environment. Technologies such as SPBs can help significantly reduce this waste.
The convergence of plastic waste pollution problems and a need for urban housing developments also presents a unique opportunity for SPBs. According to the United Nations, 55% of the world’s population lives in urban areas. In urban areas, high population density leads to exacerbated plastic waste problems. The U.N. further estimates that about 68% of the world’s population will live in urban areas by 2050. By using available plastic waste to build housing for the growing urban population, SPBs could help reduce world plastic pollution.
How are SPBs made?
When Rhino Machines started the SPB project, its objective was to attain zero waste through the reclamation of foundry waste. Initially, the experiment tested using foundry dust with cement to make bricks. This experiment resulted in 7-10% waste recycled for cement bricks and 15% waste recycled for clay bricks. The company realized the experiment required using resources such as cement, soil and water, which was not justified by the waste recycled. Further research led the team to use foundry dust with plastic waste to boost the project’s sustainability. Using plastic waste as a bonding agent eliminated the need for water and cement during mixing.
Building with SPBs contributes to the environment in two ways. Producing the blocks requires a mixture of about 80% foundry dust with about 20% plastic. Consequently, the project does not need water or cement. This means that the blocks use less natural resources while also reducing inorganic waste.
The experiment to produce SPBs also uncovered additional positive revelations. Apart from the fact that these blocks are sustainable, they also offer the construction industry a strong building alternative. According to Technology Times, SPBs are 2.5 times stronger than normal red clay blocks. Additionally, as SPBs are made from waste, “the cost of production can easily compete with the commonly available red clay brick or the CMU (concrete masonry unit).”
Rhino Machines approached several organizations including hospitals, schools and local municipal corporations to collect clean plastic for the project. In about four months, the company collected over six tons of plastic waste and 15 tons of foundry dust. This collection helps demonstrate just how much plastic waste is available to be used in the production of SPBs.
Furthermore, the company is “preparing to come up with an ecosystem solution so that the foundries across the country can develop and distribute” SPBs. As described in a statement from Rhino Machines, this is part of an effort to bring SPBs to impact zones that are part of Corporate Social Responsibility (CSR), “a Government of India initiative for businesses to undertake philanthropic causes and give back to the community.”
As the research and experimentation shows, SPBs have the potential to relieve plastic waste concerns not only in India but all over the world. If industries can adopt this new building technology, we may have hope for a future with less plastic pollution.
Images via R+D Studio