Gallery: ES Pipe Waterwheel Generates Hydroelectricity Every Time You T...

 

Here at Inhabitat we love discovering products that generate power from everyday activities – innovations like piezoelectric energy-generating roads and human-powered clothing have the potential to change the world. That’s why were so intrigued by the ES Pipe Waterwheel – it’s a simple system that allows you to generate energy every time you turn on the tap. The Pipe Waterwheel is designed to be installed inline with existing pipes, and it uses the flow of water to turn a set of mini energy-generating turbines.

Read the rest of this entry »

LEAVE A COMMENT

or your inhabitat account below



11 Comments

  1. janec1953 July 10, 2015 at 1:21 pm

    I have a design based on tap water flow that generates hot water. I invented it in 1993 and had the drawings checked by a retired physics professor from a New Zealand university who said it was a pretty invention but needed some work on a few details. I redesigned it and after seeing the ES PIPE WATERWHEEL Generator on the inhabitat sustainable design innovation website today , I would very much like to get my design manufactured too.
    Ryan Jongwoo Choi’s 2012 mini hydro power device creates electricity from water flow . My design is an apparatus that is to be attached to a cold water tap to make instant hot water and if there is low water pressure it will still work. I can see it being very useful in substantially reducing electricity and gas bills. It would also be useful in refugee camps and emergency disaster situations and in the third world where electricity and gas energy sources are not available and wood is in short supply.

    I am looking for a trustworthy 3D computer expert who could convert my drawings and make the prototype parts in Wellington New Zealand. Once this is done I will search for an ethical (green)manufacturer whom I can license my invention to, for manufacture and distribution.
    I can be contacted on this site.

  2. pots February 22, 2015 at 8:20 pm

    Rather than just lighting a light bulb (which may or may not be useful) it would be helpful if there was an adapter to charge a battery that could be used for multiple uses

  3. Ahmed El Bana May 29, 2013 at 5:40 am

    can i find a ES Pipe Waterwheel for Pipe diameter 200 to 250 mm?
    and what the output energy in this case?

  4. JoeAR July 23, 2012 at 2:45 pm

    Great idea, but the item shows a small light bulb attached to the device. I don’t need a small light bulb next to faucet! Can this be tied in the electrical system or grid, to save on the electricity you use? Can it be attached on the line coming into the structure? To utiltize all water usage, such as washing dishes, clothes washer, dishwasher, showers, flushing toilets, and even watering gardens or sprinklers systems. If icould reduce my electric bill even by a small percentage ,that would be energy savings!

  5. abiddl94 July 21, 2012 at 9:33 am

    I guess I don’t get a couple of the comments. If you have running water you have pressure in the line, that is the only way it will work. No pressure=no water in the sink shower etc. It you have “city” water you ARE paying for pressure already, that is the bill the city sends you every month that says how many gallons you used. This system uses a “by-broduct” of something you are already paying for ie city water or your own water pump and “creates” a new product ie energy. Maybe these guys should load a different video to explain it a bit better.

  6. karltravis July 20, 2012 at 3:42 pm

    Seeing how much it rains here in Vancouver (aka The Wet Coast), why couldn’t you set this up to our downspouts!? You’re welcome.
    😉

  7. erikm July 16, 2012 at 7:35 pm

    It is completely right what alexgh says. You just collect the energy that a pump has put in the pipeline.
    And if you use uphill water towers for the pressure? How is this water coming up that hill? And as I understand hydrodynamics the water-pressure of the whole system is affected as you collect energy at one point. So the pressure far away from the water tower will get even worse, even if use this system near the tower.
    So no energy-gain here, just another way to transport energy, what would be useful if you dont have a grid.

  8. mantisgrip July 9, 2012 at 10:10 am

    We at Mantisgrip love passive action power collection. Our research and development team is actively producing ridge vent energy collection system: from sunlight redirection into encapsulated columnar solar panels to vent-action micro wind turbines, these roof top ridge vents follow similar principles as the ES Pipe water wheel.

  9. keefc01 July 6, 2012 at 9:10 am

    Many towns in rural areas have uphill water towers which provide the pressure to the system. This is required either way to get water to the furthest reaches of the town. Some homes will have low pressure. For the homes close to the tower, and downhill will have higher pressure. This product will work for them. In the home. Once the water is in the home it doesn’t matter. As long as they have high enough pressure to use it and still shower/wash dishes.It won’t affect the towns system unless it’s installed in the water mains. Which you’re correct, would be foolish.

  10. alexgh July 5, 2012 at 11:23 pm

    Don’t we pay to pressurize our water system which uses electricity to creates water pressure? It would be more efficient to simply use energy from the outlet instead because there’s energy lose from turning electricity into pressure then turning that back into electricity. If we install these on every pipe in the system we would have to use more energy to push the same amount of water we had before so we wouldn’t have any gain in energy.

  11. amyro July 5, 2012 at 9:00 pm

    It’s not WASTE water, it’s clean incoming water. Please fix that typo above!

get the free Inhabitat newsletter

Submit this form
popular today
all time
most commented
more popular stories >
more popular stories >
more popular stories >
Federated Media Publishing - Home